14 Home Mistakes That You Can’t Afford To Make

 

  1. Never Change the Furnace Filter

When a furnace stops functioning, it is usually due to clogged air filters. Clogged air filters can also cause damage to heat exchangers and blower motors. It’s best to replace your filter before there is a problem.

An air filter gauge is a handy tool that can be used to remind you to change your filter regularly. The gauge measures airflow to tell you when your air filter needs to be changed. These 21 tulum mexico homes for sale cooling and maintenance tips are essential.

  1. Taking down a load-bearing wall

Homeowners in older frames are often tempted by the temptation to take down walls and make a more open layout. If the wall is not load-bearing, it could cause the second floor to fall onto the first. You can ask an inspector to determine whether it is safe to remove the wall. Learn more about wall replacement.

 

  1. You have not read the Installation Manual.

One frustrated DIYer learned a hard lesson after installing a garage door opener and spending hours trying to figure why it wouldn’t work. The neighbor came over and picked up the manual included with the opener. He then called the manufacturer’s support line. The customer service representative was able to solve the problem after answering one question. Because the cover won’t work until it is covered, he asked the customer service representative if the cover was still on the opener. This was the problem.

What is the lesson? The lesson? These are some additional tips for installing garage door openers.

  1. Never check the thermostat

Did you know that you can reduce your energy bills simply by setting and monitoring your thermostat? You can simply reset your thermostat when you’re away from home at night. The U.S. Department of Energy states that you can save up to 10% on heating and cooling by simply turning your thermostat back seven to 10 degrees for eight hours a day from its normal setting. According to the U.S. Department of Energy, you can save up to 10% per year by turning down your thermostat seven to ten degrees for eight hours each day.

Is your thermostat still not working?

  1. Never check the Furnace’s power.

Check that the power is turned on! Your furnace’s power switch looks just like a normal light switch. It can be accidentally turned off or bumped. Flip the switch on and off if it is not working. You can also see easy furnace repairs that you can DIY.

 

  1. You can start the AC without doing this:

What will you do if your air conditioner doesn’t turn on the first day of spring or summer? This common error is not something you should make.

Move the thermostat mode switch to Cooling’, and the fan switch to Auto’. Let the blower run for 30 minutes or until you feel there is good airflow at all registers. Turn the AC back on again to verify it is working. If the AC continues to work, you have likely fixed the problem. For more DIY AC repair advice, visit our complete guide.

  1. Paint Glossy on a Poor Surface

High-gloss paint can be beautiful, but applying gloss paint to surfaces that aren’t perfect will only make them worse. Shiny paint will reflect light and highlight any flaws. If you plan to paint with a semigloss sheen or gloss sheen, ensure that the surface is well prepared and smooth. How to prepare wood trim for painting

  1. Paint the Ceiling Without Wearing a Hat

You can get little paint splatters everywhere when you paint a ceiling. Many will end up on your head. Although it may not seem like a big deal, it can be quite annoying to clean up. Don’t expect to get your old hat covered in paint specks after the job is completed.

 

  1. Making Rookie Mistakes

These are two common mistakes made when first painting:

  1. The paint can lid should be removed. This bad habit can lead to a lot of track paint being tracked all over the place. There are other reasons you should put the lid back on as well. This will keep your paint fresh and prevent dry-out paint crud from sticking to the lid or can. You’re less likely than you think to mix up lids of two different colors, which can lead to problems later. These are our top tips for how to store paint cans.
  2. You forget to lock your pets. This is what can happen: you walk out of the room that you are painting, and your dog is soon there sniffing around. He grabs the handle of the paintbrush and drags it across the house, leaving behind painted paw prints. Keep your pet away from the painting project to avoid any potential problems.
  1. Fertilizing at the Wrong Times of the Year

You could be wasting your time and money if you only fertilize your lawn when it is needed, such as when you have the time or when fertilizer prices are low. Fertilizers should be applied during certain times of the growing season. These are some of the best tips for fertilizing your lawn.

  1. Never Resetting Your Ice Maker

Clean your fridge and freezer before you leave for a time. Make sure to replace the tray. The ice maker won’t receive the signal that it is full and will continue making ice until it is full. Be careful when you open the door next time! You can also lift the lever on some icemakers to ensure that no ice is made while you away.

  1. Never clean your dryer lint screen

The most common reason your gas clothes dryer doesn’t dry your clothes is a clogged vent. If the dryer is not drying your clothes properly, you can use a vacuum or a brush to remove the lint.

This is something service technicians are used to seeing all the time. Somebody gets in there, cleans up all the lint, and pushes the gas valve shut without realizing it. The technician is then called. They simply need to reach into the dryer and turn the valve on, then charge for the service call. This guide for clothes dryer repairs will help you solve most problems.

  1. Never Change the Thermostat Batteries

After turning on the thermostat, checking that the furnace is on if your home still feels cold, you can change the thermostat batteries. Programmable thermostats require batteries that can be easily forgotten to replace. If you don’t already have a programmable thermostat and want to set one up, this is a step-by_step guide.

  1. An improperly sized fan should not be installed

It’s tempting to increase the size of a ceiling fan to move more air. One DIYer did it. The result was loved by everyone until someone opened the cupboard doors with the fan on. After a series of loud bangs, they discovered that the fan blades had been too long and were scratching at the edges of the cupboard doors.

The family decided to put a rubber band around the handles of the cupboard doors to remind them not to open the doors when the fan is on. Even if your ceiling is angled, this ceiling fan installation guide will help you.