Buyer’s Guide: Best Mold Removal Kits

Mold can be dangerous and difficult to eradicate. It is important to find a good mold removal product because mildew not only can be ugly but may also pose a health risk. Most mold removers are applied directly to the affected area. Some mold removers need elbow grease, others can be applied with no effort.

These are the best mold removal products, regardless of whether your problem is within or outside the house.

RMR-141 RTU is a powerful and effective solution to stop mold growth. This mildew stat is registered by the EPA. It is a chemical agent that inhibits mildew growth. It is effective against 141 microorganisms, including bacteria and mold. Its unique ability to clean, disinfect, deodorize and disinfect non-porous surfaces is what makes it so popular.

Keep in mind that this mold removal product is specifically designed to kill mildew and mold fungus found on porous surfaces. It is not a mold remover. If mold or mildew has built up over time, such as for years, you might need to use another product to get rid of the staining.

This mold remover does more than just kill mold and mildew. It also prevents new spore growth. MoldArmor Rapid Cleaning Remediation is safe to use on many surfaces including vinyl, laminate, sealed fiberglass, and acrylic. It is great for protecting damp areas such as bathrooms and screened porches. This mold preventative is safe to use indoors and outdoors. However, it can cause serious respiratory problems if not ventilated properly.

This formula can be used as a one-step disinfectant, sanitizer and mold, and mildew removal. Simply spray it on the desired surface, wait according to the application, then rinse it off or wipe it clean. It is super simple to treat existing mold and mildew issues while also reducing future growth.

The plant-based Botanical Decon Defectant from Benefect is a natural way to remove mold and mildew without using strong chemicals. Some mold removers have strong chemical agents, which require you to wear eye protection or gloves and emit strong fumes that need ventilation. Botanical Decon, on the other hand, is gentler and contains no dyes, chemicals, or health warnings. It does not require rinsing, is non-irritating, and can be used on skin and food surfaces.

This product is also effective against mildew and mold. It is registered with the EPA as a mildew stat/fungicidal product and kills viruses and bacteria. To achieve results, the proprietary formula uses Thymol (derived from Thyme essential oil). Benefect also incorporates chemistry to make a long-lasting surfactant that helps in the prevention of mold growth.

Wood exposed to the elements can become a breeding ground for mold, mildew, and other growths. This organic material is naturally porous and can be a host for mold, mildew, algae, and other growths. However, homeowners may face serious problems from the discoloration or rot they cause. Use Wet and Forget Mold Removal to treat your deck, fence, outdoor furniture, and other exposed wooden surfaces.

The slow-release product penetrates wood’s porous surface and starts to treat existing mildew and mold remediation problems. It does not require any scrubbing, rinsing, or bleaching. You won’t be disappointed if the mold remover doesn’t show immediate results on wooden surfaces in your home. The formula is very time-consuming and can take up to several days to notice a difference. The product reacts to rain and reduces mold or mildew each time it rains.

After mold or mildew is gone, Wet and Forget can be used to maintain the wood’s appearance. To prevent mold growth, simply apply the product again.

Fabrics can be easily contaminated by mold, which can cause odor, discoloration, and staining. This is particularly true for fabrics that are exposed to damp or humid conditions, such as furniture outside on a patio or pool. Concrobium Mold Control Aerosol is an effective and simple way to remove mold from fabric surfaces such as furniture, curtains, cushions, and other fabrics.

A combination of an effective formula and an aerosol application tool creates a fine mist that covers all surfaces evenly. It doesn’t require you to scrub or rub it in. Instead, it kills the mold roots as it dries. This product is registered by the EPA and does not contain bleach. It can be used to treat fabrics and other soft materials.

Mold Armor EZ House Wash Mold and Mildew Remover are easy to use on large concrete areas that have become stained or slippery due to mold and mildew. Attach your outdoor hose to the container, spray the product evenly across the surface, and then rinse with water from the hose. This method is better than using a small squeeze trigger to spray the product on large areas such as concrete driveways, sidewalks, or porches.

This product can also be used to remove mold from concrete. It can also be used on vinyl siding, stucco, and aluminum as well as painted wood, brick, and other outdoor surfaces. It won’t cause any harm to plants if used according to directions. This makes it an excellent choice for landscape preservation and dealing with mildew and unsightly mold.

It is well-known that mold and mildew thrive in damp, moist bathroom environments. Microban24 Bathroom Cleaner is a targeted formulation that can help you win the battle against mold in your bathroom. This bathroom cleaner is a powerful tool for removing soap scum and will shine hard surfaces while also killing harmful microorganisms.

This mold remover has been proven effective against Aspergillus. It also cleans and disinfects surfaces, making it an easy solution to keeping your bathroom free from fungus, bacteria, and viruses. To prevent mold growth, Microban24 should be applied every seven days after deep cleaning surfaces that are currently affected by mildew or mold.

Final Verdict

Our top pick for a strong defense against mold and other microorganisms is RMR Brands RMR141 Disinfectant ( see at Amazon). This mold remover has been registered by the EPA and can disinfect surfaces upon contact. If you prefer something natural, the Benefect Botanical Decon 30 disinfectant cleaner ( ) is what you should consider. It doesn’t contain any chemicals, dyes, or warnings.

Type

There are two main types of mold and mildew formulas. These terms will help you understand the potential effects of the product on your mold problem.

  • Fungicide: Kills the root systems of mold and mildew
  • Mildewstat: Prevents the growth of mold and mildew spores

It is worth noting, however, that there are many products that combine these two types of mold removers. This combination will be most beneficial to homeowners who want to solve the problem permanently.

Effectiveness

It is possible to assess a product’s effectiveness by checking that it has been EPA-registered. An EPA registration number should be printed on the container or bottle to prove that it has been registered with the EPA as a fungicide/ mildew stat.

Many products kill mold quickly. Some formulas require just one minute to work. Some products can take up to 15 minutes, while others may take longer. It all depends on whether you follow the manufacturer’s instructions and whether the product has treatment to prevent mold growth in the future.

Application

Although it may seem like a difficult task to remove mold and mildew, choosing the right product can make it easier. Many mold removers are available in spray bottles for indoor use. These spray bottles provide a thorough and even coverage, even in difficult-to-reach places. Make sure to check if the product requires you to scrub after application. This can be difficult in high-height areas such as above a shower. It may be easier to find a product that doesn’t require elbow grease.

You might consider a concentrated product to treat mold and mildew outside your home. This can be used to cover large areas of siding, decking or other materials. For a faster and more effective application, some outdoor mold removers can be attached to your garden hose.

What is the working principle of mold removal?

To eliminate mold, products are designed to kill the spores (or roots) of the mold. Most formulas require that you wait at least 15 minutes after applying the product. The product kills mold spores from the roots and cleans up the surface. Antimicrobial coatings are a common feature of mold removers. They help prevent further mold growth.

Are mold removers safe to use?

Mold removers can be used by homeowners if they are followed according to the manufacturer’s instructions. It is important to pay attention to any instructions for ventilation and personal protective equipment, such as wearing a mask when using mold remover. To prevent skin irritation, you should follow all directions for wearing gloves when applying the product.

What are the best times to call a professional?

All types of mold should be removed with safety precautions, but some molds, such as the ‘black mold’ (also known as Stachybotrys Chartarum), may require professional remediation. This slimy, green-black mold grows on porous materials such as drywall, wood, and gypsum boards. Its spores can cause illness and respiratory problems if inhaled.

If your attempts to remove mold fail or the problem recurs quickly, you might consider mold remediation. An expert can help you identify the type and form of mold that you have, and then formulate a plan of action to stop it from growing back.

Erica Puisis has extensive experience in researching the best home organization and cleaning products for The Spruce. After tackling her fair share of mildew and trouble spots around the house, she is always looking for safer, more effective products to make it easier and faster to keep your home clean.